Sprite icons

Pressure transmitter | display | 0-10 kPa | 24 VAC-VDC

No one has commented on this product yet, please be the first (look below), we appreciate your opinion!
Article code DPS-G-10K -2
GTIN 0.540.100.300.156.1
Intrastat number 90.26.20.20
Category Differential pressure transmitters with display
Current stock 2 U.
Factory lead time 4 Week(s)

Product description

This is a differential pressure sensor equipped with a display, designed to operate within the range from 0 to 10.000 Pa. It requires a supply voltage of 24 VAC or 24 VDC. Its functionality includes measuring either differential pressure or air volume flow. To obtain air velocity readings, you can connect an external Pitot tube set, e.g. the PSET-PTS-200. One common application is monitoring air volume flow and ensuring the provision of fresh air.

The measured values are visualised through a 7-segment LED display. Transmitting measured values is achieved through both the analogue output and Modbus RTU protocol. The output type is selectable.

The sensor features four LED indicators that provide visual cues for both the device status and measured values.

Users can adjust the sensor settings, including the differential pressure range, via Modbus RTU communication.

Additional specifications and description

 
Differential pressure, air volume flow or air velocity?
This sensor measures differential pressure [Pa]. Based on this measurement, air volume flow [m³/hr] or air velocity [m/s] can be calculated. To calculate air volume flow based on the K-factor of the fan, use the optional connection set type PSET-PVC-200 or PSET-QF-200. This connection set can also be used to measure differential pressure. To calculate air volume flow based on the duct cross section [cm²] or air velocity [m/s], use the optional connection set type PSET-PTS-200 or PSET-PTL-200. DPS with PSET-PVC
 
Visual indication
The 7-segment LED display visualises the measured pressure, volume flow or air velocity. On top of that, the green, yellow and red LED offer a visual indication of the measured value. The green LED indicates that the pressure level is within range. When the pressure level enters the alert range, the yellow LED lights up. Red means: differential pressure out of range. The LEDs can also indicate the status of the air volume flow or air velocity. The second green LED indicates the sensor status. It is activated when power supply and Modbus RTU communication are enabled. 
 
How does it work?
This sensor has one analogue output. It transmits the measured differential pressure, air volume flow or air velocity proportionally. The default range of this sensor is 0 to 10.000 Pa. By default, the output transmits 0 V at 0 Pa and 10 V at 10.000 Pa. This range, the output type and all other settings can be adjusted via Modbus RTU. The output type can be adjusted via Modbus RTU: 0-10 VDC / 0-20 mA / 0-100 % PWM.
 
Reduced installation time
The supply voltage, the analogue output and Modbus RTU communication can be connected via the cage clamp terminal block. They eliminate the need for routine maintenance and guarantee a reliable contact for solid or stranded wires. This sensor can be supplied with 24 VDC or with 24 VAC. It is intended for 3-wire connection. The ground of the output (GND) is internally connected to the ground of the supply voltage (V-). Make sure not to connect this common ground to other devices that are powered by a DC voltage.
 
High quality
The enclosure is made of high-quality r-ABS VO (UL94) plastic. This material is heat resistant, very tough and offers good protection against impacts. The pressure connection nozzles are made from Aluminum. The sensor enclosure offers an IP65 protection against ingress of dirt and water. This sensor can be wall-mounted.
 

Remarks, reviews & ratings

There are no reviews added yet. Please don't hesitate and be the first! We value your opinion.
Add a remark or a review and rating.
0
Report an error